Monday, August 3, 2020

Technical upgrade and performance analysis of oil filter


1. Performance introduction of each type of oil filter;

I. YJL Assembled automatic backwash filter device -- Turbine turbine oil Purpose:

This product is suitable for steam turbine oil system, can be in series on the lube oil supply unit mother tube, with synchronous operation, the product by enclosure, pipeline, instrument panel and ZCL - type I, automatic backwash filter elements, high filtration precision, large oil capacity, low pressure loss, safe and reliable, easy installation and maintenance workload small, etc. This device can effectively control the cleanliness of oil, improve the safety and reliability of unit operation, and greatly shorten the oil cycle time during maintenance. This product has been widely used in the oil system of 50 ~ 600MW units.

Ii. Vacuum Use of turbine Oil:
TY - Q series turbine oil vacuum filter oil machine, widely used in electric power, chemical industry, paper making, petroleum, metallurgy, etc., turbine oil purification treatment of unqualified, the machine set precision filter, vacuum drying, coalescence separation, three-dimensional spiral atomization technology at an organic whole, make have mixes up, water cut, aging, acid, much bubble is inferior product, serious turbid turbine oil emulsion was treated after become clear and transparent, reached the standard of new oil. It is an ideal equipment for purifying turbo oil on line to ensure the service life of turbo oil.

Related products:

Oil Filter Of Start Up And Shutdown Steps And Operation

LY High Efficiency Oil Filter Of Operation Manual

Vacuum Brazing Machine For PCD Diamond Tools

Other related products:

Liquid Ring Vacuum Pump
Dry screw vacuum pump
Oil Diffusion Vacuum Pump

No comments:

Post a Comment