As a large calcining equipment, the production process of the rotary furnace is relatively complex, so its production needs to be set up and monitored to test the running state. In order to help you better understand and use this equipment, this paper shares its measurement and control system with you.
1. Automatic control of temperature outside the roller
The temperature of
the rotary furnace is automatically controlled, and the system can realize the
automatic control of the temperature outside the drum. Furnace temperature can
be set below the rated temperature, temperature control accuracy is less than 2
degrees. By controlling the external temperature of the drum, the temperature of
the material in the drum can be controlled.
2. Exhaust outlet temperature
detection
A bimetal thermometer is installed on the vent at the upper end of
the air supply hood, mainly used to detect the temperature of the vent and
display it on site, so as to observe the temperature change.
3. Roller speed
regulation
The speed regulation of the drum is realized by the frequency
conversion speed regulation of the driving motor. The operation panel of the
inverter is installed on the panel of the control cabinet, which is convenient
for operation and helpful for the operation of the equipment.
4. Feeding
speed adjustment
Feeding speed is regulated by screw feed motor frequency
conversion. The inverter operation panel of the converter is installed on the
panel of the control cabinet for easy operation. Feeding speed should be decided
in the trial production stage, and gradually groped to increase, confirm the
appropriate feeding speed, not too fast.
5, dust removal fan frequency
adjustment
Dust removal fan adopts frequency conversion speed regulation,
flexible and convenient. The operation panel of inverter is installed on the
panel of control cabinet for easy operation.
Through the above introduction, it is not difficult to find the composition of the measurement and control system of the rotary furnace, their existence is an auxiliary role for the equipment, and easy to operate, it needs to pay attention to the standard operation, so as to help the long-term use of the equipment.
Related products:
How To Install The High Temperature Test Furnace
How To Repair The Test Furnace If It Breaks Down
How To Repair The Broken Resistance Wire Of The Rotary Furnace
What Are The Calibration Methods For Box-Type Experimental Electric Furnace
How Is The Waste Gas Of The Converter Treated And Discharged
Vacuum Brazing Machine For PCD Diamond Tools
Other related products:
Liquid
Ring Vacuum Pump
Dry
screw vacuum pump
Oil Diffusion
Vacuum Pump
No comments:
Post a Comment